Raspberry Pi/Installing

Download Wheezy

http://www.raspberrypi.org/downloads

Verify SHA1

http://support.apple.com/kb/ht1652

openssl sha1 [full path to file]
e.g. openssl sha1 /Users/myaccount/Documents/1024SecUpd2003-03-03.dmg

Installing Image

http://elinux.org/RPi_Easy_SD_Card_Setup#Using_command_line_tools_.281.29
1) identify the disk (not partition) of your SD card. e.g. disk4 (not disk4s1)

diskutil list

2) unmount SD Card

diskutil unmountDisk /dev/<disk# from diskutil>
e.g. diskutil unmountDisk /dev/disk4

3) copy image onto SD Card

sudo dd bs=1m if=<your image file>.img of=/dev/<disk# from diskutil>
e.g. sudo dd bs=1m if=2012-12-16-wheezy-raspbian.img of=/dev/disk4

3b) to check status of copy

CRTL+T

4) unmount SD Card

sudo diskutil eject <disk# from diskutil>
e.g. sudo diskutil eject /dev/rdisk3

Getting wireless card to work on WEP

http://jeffskinnerbox.wordpress.com/2012/11/05/wifi-support-on-raspberry-pi/

~$ nano /etc/network/interfaces
# The loopback network interface<
auto lo
iface lo inet loopback
 
# The primary (wired) network interface
iface eth0 inet dhcp
 
# The wifi (wireless) network interface
auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
       wireless-essid YOUR_SSID
       wireless-key YOUR_WEP_KEY

PwnPi3.0

download form here
install .img just like you would a normal .img

if the img doesnt work out of the box

download raspberry pi boot files from here
copy the boot directory to the raspberry pi and overwrite any matching files.