Grafana Installation\OracleLinux

Overview

Grafana Installation on Oracle Linux 6.8

Network Config

If you installed the basic package, most likely the NIC is not configured for DHCP. try:

User ~ $ system-config-network

Once DHCP is configured, the next step is to restart the NIC.

User ~ $ ifdown eth0
User ~ $ ifup eth0
 
Determining IP information for eth0... done.
User ~ $ifconfig eth0

Make sure your hostname is defined in /etc/sysconfig/network

HOSTNAME=server.fqdn.com

Also for the network config, put your FQDN in the hosts file @ /etc/hosts

127.0.0.1   server.fqdn.com
::1   server.fqdn.com

connect on boot

By default the network interface comes turned off on boot.

~$ sudo vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
HWADDR=00:0c:29:4f:09:c8
TYPE=Ethernet
UUID=5eed1f7e-74da-4841-b03b-3d4cc0812ade
ONBOOT=no
NM_CONTROLLED=yes
BOOTPROTO=dhcp
USERCTL=no
PEERDNS=yes
IPV6INIT=no

Change it so it automatically starts and connects on boot

ONBOOT=yes