Fortinet/General
From r00tedvw.com wiki
Contents |
Connecting
MAC OSX
Requirements
- USB to Serial adapter & software if needed (unless your MAC has a serial port)
- Console Cable
Software
Keyspan
FTDI USB Serial
Prolific PL2303
Personal Use
I use the following equipment:
|
Connection
After installing the appropriate USB to Serial Driver, plug in your USB to Serial device and then check to see if it is properly recognized.
Open Terminal ~$ ls /dev/cu.* /dev/cu.Bluetooth-Incoming-Port /dev/cu.KeySerial1 /dev/cu.Bluetooth-Modem /dev/cu.USA19Hfa13P1.1
Look for something similar to USB, Serial, or the name of your device. In the case above, the correct selection is
/dev/cu.USA19Hfa13P1.1
Start the connection with:
~$ screen /dev/cu.USA19Hfa13P1.1 9600 (screen device baudrate)
You may have to hit enter before the FGT login prompt appears
At this point you should see the following:
FGT-602906515411 login: